Produk  

View as
Show 20 50 80 120
Sort by

PGYTECH Camera Shoulder Straps Fern Green

Fitur Utama

  • Konektor Manik Pelepasan Cepat
  • Panjang yang Dapat Disesuaikan
  • Mendukung hingga 90 kg
  • Dikonfigurasi dengan Pelat QR Tipe Arca
  • Loop 3 Lapis Kokoh

Rp 829,000

PGYTECH Camera Shoulder Straps Rock Grey

Fitur Utama

  • Konektor Manik Pelepasan Cepat
  • Panjang yang Dapat Disesuaikan
  • Mendukung hingga 90 kg
  • Dikonfigurasi dengan Pelat QR Tipe Arca
  • Loop 3 Lapis Kokoh

Rp 829,000

PGYTECH Camera Shoulder Straps Night Black

Fitur Utama

  • Konektor Manik Pelepasan Cepat
  • Panjang yang Dapat Disesuaikan
  • Mendukung hingga 90 kg
  • Dikonfigurasi dengan Pelat QR Tipe Arca
  • Loop 3 Lapis Kokoh

Rp 829,000

Peak Design Slide Lite SLL-MN-3 Midnight Blue

Bawa perlengkapan Anda dengan nyaman dan bergaya dengan Tali Kamera Slide Lite biru dari Peak Design ini. Tali ini menggunakan konektor jangkar yang kuat dan dapat dilepas yang menempel pada lubang tali kamera Anda atau pelat pemasangan yang disertakan, menahan hingga 200 pon gigi dan dengan mudah mendukung sebagian besar sistem DSLR dan mirrorless. Dengan memasangkan koneksi serbaguna ini dengan panjang yang dapat disesuaikan 39 hingga 57", Slide Lite dapat dikonfigurasi untuk berfungsi sebagai tali selempang, bahu, atau leher.

Tali anyaman nilon lebar 1,3 "ini empuk secara internal untuk membantu memastikan penggunaan yang nyaman, dan kedua sisinya memiliki sifat yang berbeda: satu sisi halus untuk menggeser kamera ke mata Anda saat dipasang sebagai selempang, sementara yang lain memiliki pegangan silikon yang mencegah tergelincir saat menggunakannya di leher atau bahu Anda. Empat titik jangkar yang disertakan dapat dipasang dan dilepaskan dari tali dengan satu tangan dan dibiarkan di lubang tali sehingga Anda dapat dengan mudah beralih di antara kamera saat memotret.
  • Dapat dipakai sebagai selempang, bahu, atau tali leher
  • Panjangnya dapat disesuaikan dari 39 hingga 57", dengan lebar 1,3"
  • Jangkar yang dapat dilepas digunakan untuk menyambung ke peralatan, tahan hingga 200 lb
  • Tinggalkan jangkar pada perlengkapan Anda sehingga Anda dapat dengan mudah memasang dan melepaskannya dari tali saat memotret
  • Sisi halus dan anti selip yang memungkinkan Anda memilih jumlah cengkeraman yang diinginkan
  • Anyaman berlapis internal memberikan kenyamanan yang lebih baik tanpa menjadi besar
  • Empat konektor jangkar dan pelat tripod disertakan dengan produk

Rp 1,250,000

Peak Design Slide Black SL-BK-3

Carry your equipment in comfort and style with this black Slide Camera Strap from Peak Design. This strap uses strong, removable anchor connectors that attach to the eyelets of your camera or the included mounting plate, holding up to 200 lb of gear and easily supporting most DSLR and mirrorless systems. By pairing this versatile connection with a long adjustable length from 39 to 57", the Slide can be configured to work as a sling, shoulder, or neck strap.

The strap has a width of 1.8" and is made of nylon webbing that is padded internally to help ensure comfortable use. Its two sides feature different properties: one side is smooth for sliding the camera to your eye when set up as a sling, while the other has a silicone grip that prevents slipping when using it on your neck or shoulder. The four included anchor points attach and detach from the strap with a single hand, and can be left on the eyelets so you can easily switch between cameras while shooting.

  • Wearable as a sling, shoulder, or neck strap
  • Adjustable length from 39 to 57", and a width of 1.8"
  • Removable anchors used to connect to equipment, hold up to 200 lb
  • Leave anchors on your gear so you can easily attach and detach them from the strap while shooting
  • Smooth and non-slip sides that allow you to choose the amount of grip desired
  • Internally-padded webbing provides improved comfort without being bulky
  • Four anchor connectors and a tripod plate are included with the product

Rp 1,460,000

Peak Design Slide-ASH SL-AS-3

Carry your equipment in comfort and style with this ash Slide Camera Strap from Peak Design. This strap uses strong, removable anchor connectors that attach to the eyelets of your camera or the included mounting plate, holding up to 200 lb of gear and easily supporting most DSLR and mirrorless systems. By pairing this versatile connection with a long adjustable length from 39 to 57", the Slide can be configured to work as a sling, shoulder, or neck strap.

The strap has a width of 1.8" and is made of nylon webbing that is padded internally to help ensure comfortable use. Its two sides feature different properties: one side is smooth for sliding the camera to your eye when set up as a sling, while the other has a silicone grip that prevents slipping when using it on your neck or shoulder. The four included anchor points attach and detach from the strap with a single hand, and can be left on the eyelets so you can easily switch between cameras while shooting.

  • Wearable as a sling, shoulder, or neck strap
  • Adjustable length from 39 to 57", and a width of 1.8"
  • Removable anchors used to connect to equipment, hold up to 200 lb
  • Leave anchors on your gear so you can easily attach and detach them from the strap while shooting
  • Smooth and non-slip sides that allow you to choose the amount of grip desired
  • Internally-padded webbing provides improved comfort without being bulky
  • Four anchor connectors and a tripod plate are included with the product

Rp 1,460,000

Peak Design Slide Lite SLL-BK-3

Carry your equipment in comfort and style with this ash SlideLITE Camera Strap from Peak Design. This strap uses strong, removable anchor connectors that attach to the eyelets of your camera or the included mounting plate, holding up to 200 lb of gear and easily supporting most DSLR and mirrorless systems. By pairing this versatile connection with a long adjustable length from 39 to 57", the SlideLITE can be configured to work as a sling, shoulder, or neck strap.

The strap has a width of 1.3" and is made of nylon webbing that is padded internally to help ensure comfortable use. Its two sides feature different properties: one side is smooth for sliding the camera to your eye when set up as a sling, while the other has a silicone grip that prevents slipping when using it on your neck or shoulder. The four included anchor points attach and detach from the strap with a single hand, and can be left on the eyelets so you can easily switch between cameras while shooting.

  • Wearable as a sling, shoulder, or neck strap
  • Adjustable length from 39 to 57", and a width of 1.3"
  • Removable anchors used to connect to equipment, hold up to 200 lb
  • Leave anchors on your gear so you can easily attach and detach them from the strap while shooting
  • Smooth and non-slip sides that allow you to choose the amount of grip desired
  • Internally-padded webbing provides improved comfort without being bulky
  • Four anchor connectors and a tripod plate are included with the product

Rp 1,250,000

Peak Design Slide Lite SLL-AS-3

Carry your equipment in comfort and style with this ash SlideLITE Camera Strap from Peak Design. This strap uses strong, removable anchor connectors that attach to the eyelets of your camera or the included mounting plate, holding up to 200 lb of gear and easily supporting most DSLR and mirrorless systems. By pairing this versatile connection with a long adjustable length from 39 to 57", the SlideLITE can be configured to work as a sling, shoulder, or neck strap.

The strap has a width of 1.3" and is made of nylon webbing that is padded internally to help ensure comfortable use. Its two sides feature different properties: one side is smooth for sliding the camera to your eye when set up as a sling, while the other has a silicone grip that prevents slipping when using it on your neck or shoulder. The four included anchor points attach and detach from the strap with a single hand, and can be left on the eyelets so you can easily switch between cameras while shooting.

  • Wearable as a sling, shoulder, or neck strap
  • Adjustable length from 39 to 57", and a width of 1.3"
  • Removable anchors used to connect to equipment, hold up to 200 lb
  • Leave anchors on your gear so you can easily attach and detach them from the strap while shooting
  • Smooth and non-slip sides that allow you to choose the amount of grip desired
  • Internally-padded webbing provides improved comfort without being bulky
  • Four anchor connectors and a tripod plate are included with the product

Rp 1,250,000

Peak Design Slide Camera Sling Strap SL-2

The black Slide Camera Strap SL-2 from Peak Design is an adjustable camera strap that can be worn as a sling, shoulder, or neck strap. It features Peak Design's unique Anchor Link system to quickly attach and detach the strap from your camera. The SL2 has an improved stronger anchor system which indicates when it is time to replace your anchors. The outside sheath of the anchor is black, the middle sheath is yellow and the inner sheath is red. When you start seeing yellow, it's time to replace your anchors. Two latches on the strap allow for one handed adjustment to the strap's length from 39" to 54" To wear the Slide as a sling style strap, one side of the strap attaches to the included Arca type compatible QR plate on the bottom of the camera, and the other attaches to the standard strap loop on the top. One side of the strap is smooth, so that you can easily slide your camera up to your eye when using the strap as a sling. The other side has a gripped surface for using the Slide as a shoulder or neck strap. The Slide is compatible with all versions of Peak Design's Capture camera clips.


Rp 1,460,000

Peak Design Capture Proplate PL-PP-1

The Peak Design PROplate for Capture Camera Clips is a CNC-machined anodized aluminum Arca-type and Manfrotto RC2 compatible quick-release plate. It slides into the Capture Camera Clip in four directions. There are four loops for attaching Anchors, allowing you to use the PROplate and Capture with any Peak Design quick-connecting strap.
 
The PROplate on its own is a square Arca-type plate, and it includes a hex key to add two included adapters, making it compatible with most Manfrotto RC2 and Arca-type clamps.
 
Features a connection screw with a 4mm hex drive, as well as a coin drive
The bright red injection molded pad will prevent the plate from twisting when connected to your camera


Rp 450,000

Peak Design Capture Propad PP-1

The PROpad from Peak Design is an accessory for the Capture camera clip that is compatible with all versions of Capture. It adds additional comfort and stability when using heavy camera and lens combinations. It attaches onto your belt or backpack strap either by threading the belt or strap through the inner loop or by clamping the clip and PROpad directly to the belt or strap.
  • Includes two long clamping bolts for Capture v2 and CapturePRO to make it easier to mount the PROpad onto thicker belts or straps.
  • Can be mounted in three positions: the top-loading or side-loading belt positions and the backpack position.
  • Made from Hypalon, a synthetic rubber that is resistant to chemicals, extreme temperatures, and ultraviolet light.

Rp 450,000

Peak Design Leash-ASH L-AS-3

 

This ash colored Leash from Peak Design is a camera strap designed to provide photographers with the ability to quickly and easily detach a connected camera from it for such purposes as moving only the camera to a tripod, or connecting another camera to the strap. This is made possible due to the included Peak Design Anchor Links. Each Anchor Link creates a durable, snap-in or snap-out connection point to a strap eyelet on a wide variety of cameras. Constructed for comfort and usable as neck or shoulder strap, the Leash features twist-resistant nylon and leather webbing. Additionally, it can be worn as a cross-body strap across a right or left-handed user's body, draped from one shoulder to the opposing hip. When used along with an Anchor Link, the included Peak Design Anchor Mount can create a connection point using a camera's 1/4"-20 bottom accessory thread. By attaching the Leash along a bottom accessory thread and one strap eyelet instead of two, a camera can be made to consistently face forward while against the hip, reducing the time needed by the user to raise it to their eye and capture an image. The length of this strap ranges from 32.6 to 57.1" and is 0.8" wide. Integrated, adjustment loops allow the length of the Leash to be quickly changed while in use.
  • Usable as neck, shoulder, or cross-body strap worn across a right or left-handed user's body
  • Constructed from twist-resistant, nylon and leather webbing
  • Provides the ability to quickly and easily detach a connected camera for such purposes as moving only the camera to a tripod, or connecting another camera to the strap
  • Included Anchor Links create a durable, snap-in or snap-out connection point to a strap eyelet on a wide variety of cameras
  • When used as a cross-body strap, camera can be made to consistently face forward while against the hip while using the included Anchor Mount; reducing the time needed by the user to raise it to their eye and capture an image
  • Integrated adjustment loops allow length to be quickly changed while in use
  • Hex key to attach or detach Anchor Mount
  • Microfiber pouch for storage and transport

Rp 940,000

Peak Design Leash L-BL-3

This charcoal colored Leash from Peak Design is a camera strap designed to provide photographers with the ability to quickly and easily detach a connected camera from it for such purposes as moving only the camera to a tripod, or connecting another camera to the strap. This is made possible due to the included Peak Design Anchor Links. Each Anchor Link creates a durable, snap in or snap out connection point to a strap eyelet on a wide variety of cameras.

Constructed for comfort and usable as neck or shoulder strap, the Leash features twist-resistant nylon webbing. Additionally, it can be worn as a cross-body strap across a right or left-handed user's body, draped from one shoulder to the opposing hip. When used along with an Anchor Link, the included Peak Design Anchor Mount can create a connection point using a camera's 1/4"-20 bottom accessory thread. By attaching the Leash along a bottom accessory thread and one strap eyelet instead of two, a camera can be made to consistently face forward while against the hip, reducing the time needed by the user to raise it to their eye and capture an image.

The length of this strap ranges from 32.6 to 57.1" and is 0.8" wide. Integrated, adjustment loops allow the length of the Leash to be quickly changed while in use.

  • Usable as neck, shoulder, or cross-body strap worn across a right or left-handed user's body
  • Constructed from twist-resistant, nylon webbing
  • Provides the ability to quickly and easily detach a connected camera for such purposes as moving only the camera to a tripod, or connecting another camera to the strap
  • Included Anchor Links create a durable, snap-in or snap-out connection point to a strap eyelet on a wide variety of cameras
  • When used as a cross-body strap, camera can be made to consistently face forward while against the hip while using the included Anchor Mount; reducing the time needed by the user to raise it to their eye and capture an image
  • Integrated adjustment loops allow length to be quickly changed while in use
  • Hex key to attach or detach Anchor Mount
  • Microfiber pouch for storage and transport

Rp 940,000

Peak Design SLL-1 Slide Lite

The black SlideLITE Camera Strap SLL-1 from Peak Design is an adjustable camera strap that can be worn as a sling, shoulder, or neck strap. It features Peak Design's unique Anchor Link system to quickly attach and detach the strap from your camera. Two latches on the strap allow for one-handed adjustment to the strap's length. Designed for mirrorless cameras, this SLL-1 model strap offers a thinner 1.25" width and is shorter and lighter than the SL1 strap.. To wear the Slide as a sling-style strap, one side of the strap attaches to the included Arca-type compatible QR plate on the bottom of the camera, and the other attaches to the standard strap loop on the top. One side of the strap is smooth, so that you can easily slide your camera up to your eye when using the strap as a sling. The other side has a gripped surface for using the Slide as a shoulder or neck strap. The Slide is compatible with all versions of Peak Design's Capture camera clips.


Rp 1,250,000

Peak Design Leash L-2

Versatile and quick-connecting, the Peak Design Leash Camera Strap can adapt to any camera and any shooting situation. Easily configure Leash as a sling strap, a neck strap, a safety tether, a video stabilizer and more. When you don’t need a strap, Leash quickly disconnects and stores in your pocket, purse or camera bag. Leash uses the Anchor Link connection system and comes with 4 Anchors for attachment.

Rp 510,000

Peak Design SL-L-2 Slide Summit Lassen Red/Tan

The red with tan leather Slide Camera Strap SL-L-2 from Peak Design is an adjustable camera strap that can be worn as a sling, shoulder, or neck strap. It features Peak Design's unique Anchor Link system to quickly attach and detach the strap from your camera. Two latches on the strap allow for one-handed adjustment to the strap's length from 39" to 54" To wear the Slide as a sling-style strap, one side of the strap attaches to the included Arca-type compatible QR plate on the bottom of the camera, and the other attaches to the standard strap loop on the top. One side of the strap is smooth, so that you can easily slide your camera up to your eye when using the strap as a sling. The other side has a gripped surface for using the Slide as a shoulder or neck strap. The Slide is compatible with all versions of Peak Design's Capture camera clips.

Rp 970,000
12
Cari Produk

Tampilkan hanya



Harga

Kategori
Sub Kategori
Merk/Tipe
  • Canon
  • Sony
  • FujiFilm
  • Insta360
  • DJI
  • GoPro

Copyright ©2025 Sinar Photo • Video. All rights reserved. Syarat & Ketentuan | Kebijakan Privasi

Chat via WhatsApp WhatsApp